Hobby Plus 1:18 Micro Evo Crawler "Trail Hunter V2" 2 Speed Camo RTR (AB1810303/AB18030)
In stock
- SKU
- AB1810303 (18030V2)
£116.99
Get a price match
Description / Hobby Plus 1:18 Micro Evo Crawler "Trail Hunter V2" 2 Speed Camo RTR (AB1810303/AB18030)
You do not need much space and the "Playground" is built quickly. For example, just throw a few pillows or on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.
HIGHLIGHTS:-
4 x AA Batteries For Transmitter Required
https://youtu.be/xbPIIAyRANI
HIGHLIGHTS:-
- Portal axles front & rear
- Metal gears on front and rear axles
- 2.4GHz transmitter/receiver unit
- Lighting system operated from the transmitter
- Oversize 1.2" AT tires with internal bead lock system
- Chassis mounted 1kg steering servo with panhard bar
- PPX4 water resistant electronics
- Metal chassis frame
- Painted 1.2mm Lexan body
- Tight turning circle of 80cm
- Driving time of up to 45 minutes
- Steering angle of up to 45°
- Ultimate ground clearance due to portal axles and 1.2" tires
Due to its design, the "Trail Hunter" chassis has probably the highest ground clearance currently available on the market.
Battery box and on-switch are located on the loading area. Thus, no disassembly of the body is necessary in daily use.
The operation of the standard lighting front and rear consisting of low beam and taillight is done directly on the transmitter by (repeated) actuation of the 3rd channel.
Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45° steering angle is also achieved. The gears in the axles is made of tool steel. CVD drive shafts are installed on the front axle
- New* oversized 130 "Crawler Spec"Â brushed motor (100T)
- New* developed 2-speed steel gear shift (switchable on radio CH3)
- New extreme portal axles with steel gears for even more ground clearance
- New* motor mount (even for bigger motors like 180 & 240 size)
- New* reinforced drive shafts front & rear
- New* LCG-optimized chassis layout (Low Center of Gravity)
and also...
- 2.4GHz radio system
- Vehicle lighting operated from the transmitter (CH4)
- Oversize 1.2" AT wheels with internal beadlock system
- 1kg steering servo with panhard bar
- PPX4 water-resistant electronics
- Metal chassis frame
- Painted 1.2mm Lexan body
- Tight turning circle of 80cm
- Driving time of up to 45 minutes
- Steering angle of up to 45°
- Maximum ground clearance thanks to portal axels and 1.2" wheels
- Scale: 1:18
- 4WD all-wheel drive
- 2.4GHz radio system
- "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
- 100T / 130size brushed motor
- Differentials fully locked (front & rear)
- Telescopic UJ cardan shafts
- Metal chassis frame
- Drag/Mountain brake (prevents rolling on hills)
- Digital proportional control for sensitive driving maneuvers
- LED lighting (CH4)
- Scale body with many attachment parts
- 1.2" bead lock wheels with super soft AT tires
- Waterproof 1kg mini steering servo
- 2-in-1 speed controller/receiver unit
- Driving time: approx. 45 minutes
- Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
- Remote control: 2.4GHz, 4-channel
- Steering servo: 1kg actuating force, waterproof
- Motor: 100T - 130 oversize
- Newly developed 2-speed gears
- Steel drive and portal axle gears
- Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
- Battery: LiPo 7.4V/2S 600mAh
- Battery connector system: Molex 2-pin
- Wheelbase: 158,5mm
- Ground clearance: 43,7mm
- Track width: 110mm
- Length: 241mm
- Width: 125mm
- Height: 130,8mm
- Weight: 430g (incl. drive battery)
- Wheels: 19.5x58mm
INCLUDES:
1* Mini EVO Crawler
1* 2.4GHz radio system
1* LiPo battery 7.4V 600mAh
1* USB charging cable
1* Sticker sheet
1* Manual DE/EN/FR
1* Mini tool set
4 x AA Batteries For Transmitter Required
https://youtu.be/xbPIIAyRANI
We found other products you might like!
