This is a demo store. No orders will be fulfilled.

Check out our race nights

Absima 1:10 EP Truggy "AT3.4-V2" 4WD RTR (AB12223V2)

In stock

SKU
AB12223V2
  £132.99
Get a price match

Description / Absima 1:10 EP Truggy "AT3.4-V2" 4WD RTR (AB12223V2)

The success story continues! We have equipped the AT3.4 "V2" with some new features that take the vehicle to the next evolutionary stage

Some technical changes have been made to our 1:10 Truggy - among other things, the vehicle now comes with LED lighting on the roof
  • NEW* 80A brushed speed controller withT-connector and 540 motor
  • NEW* Programmable speed controller
  • NEW* 6kg steering servo
  • NEW* LED lighting
  • NEW* Downforce rear wing
  • NEW* even more option parts available

The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
 
4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 6kg servo takes over the implementation of the steering commands.
  • 4WD all wheel drive
  • 2.4 GHz 4-channel radio system
  • 80A brushed speed controller with T-plug
  • 540size 15T motor with 32.000RPM @ 7.4V
  • 6kg steering servo (25T, ball bearings)
  • Oil shock absimrbers
  • Ball bearing main drive
  • Extremely durable composite plastic parts
  • Steel differential outputs
  • Aluminum main drive shaft with steel mounts
  • Adjustable upper tie rods
  • 5mm aluminum motor mount
  • 6mm shock towers
  • 2 differentials (front/rear)
  • Stylish "Cap Forward" buggy body
  • "Light-Weight" chassis (less weight - longer drive time)
  • Many aluminum option parts available
Tec Spec
  • Scale: 1:10
  • Dimensions (L/W/H): 405x325x165 mm
  • Weight: 1740g
  • Wheelbase: 270mm
  • Ground clearance: ca. 35mm
  • Track width: 270mm front/rear
  • Wheels front/rear: Ø 105mm / Width: 55mm
  • Shock absorber oil: 400CPS
  • Shock absorber installation length: 90mm
  • Motor ratio: pinion: 18T / main gear: 64T (module 0,6)
Includes
  • 1/10 Buggy "AT3.4V2" RTR
  • 2.4GHz "CR4S" radio
  • Sticker sheet
  • Manual
Required To Complete
  • Drive battery (7.2V NiMH or 7.4V/2S LiPo battery)
  • Charger (suitable for the drive battery)
  • 4* AA batteries for the remote control

https://youtu.be/0Gm-Hs13RFA